Photophysical Properties and Efficient,Stable, Electrogenerated Chemiluminescence of Donor–Acceptor Molecules Exhibiting Thermal Spin Upconversion

The photophysical properties and electrogenerated chemiluminescence (ECL) of three donor–acceptor molecules composed of dicyanobenzene and methyl‐, tert‐butyl‐, and phenyl‐substituted carbazolyl groups, 1,2,3,5‐tetrakis(3,6‐disubstituted‐carbazol‐9‐yl)‐4,6‐dicyanobenzene (4CzIPN‐Me, 4CzIPN‐tBu, and 4CzIPN‐Ph, respectively) are described. These molecules show delayed fluorescence as a result of thermal spin upconversion from the lowest triplet state to the lowest singlet state at room temperature. The three molecules showed yellow to yellowish–red ECL. Remarkably, the ECL efficiencies of 4CzIPN‐tBu in dichloromethane reached almost 40 %. Moreover, stable ECL was emitted from 4CzIPN‐tBu and 4CzIPN‐Ph. In case of 4CzIPN‐Me, the ECL intensity decreased during voltage cycles because of polymerization. Quantum chemical calculations revealed that polymerization was inhibited by the steric hindrance of the bulky tert‐butyl and phenyl groups on the carbazolyl moieties and lowered the spin density on the carbazolyl groups through electron conjugation for 4CzIPN‐Ph.     

Topological “interfacial” polymer chemistry: Dependency of polymer “shape” on surface morphology and stability of layer structures when heating organized molecular films of cyclic and linear block copolymers of n‐butyl acrylate‐ethylene oxide

The “topological polymer chemistry” of amphiphilic linear and cyclic block copolymers at an air/water interface was investigated. A cyclic copolymer and two linear copolymers (AB‐type diblock and ABA‐type triblock copolymers) synthesized from the same monomers were used in this study. Relatively stable monolayers of these three copolymers were observed to form at an air/water interface. Similar condensed‐phase temperature‐dependent behaviors were observed in surface pressure–area isotherms for these three monolayers. Molecular orientations at the air/water interface for the two linear block copolymers were similar to that of the cyclic block copolymer. Atomic force microscopic observations of transferred films for the three polymer types revealed the formation of monolayers with very similar morphologies at the mesoscopic scale at room temperature and constant compression speed. ABA‐type triblock linear copolymers adopted a fiber‐like surface morphology via two‐dimensional crystallization at low compression speeds. In contrast, the cyclic block copolymer formed a shapeless domain. Temperature‐controlled out‐of‐plane X‐ray diffraction (XRD) analysis of Langmuir–Blodgett (LB) films fabricated from both amphiphilic linear and cyclic block copolymers was performed to estimate the layer regularity at higher temperatures. Excellent heat‐resistant properties of organized molecular films created from the cyclic copolymer were confirmed. Both copolymer types showed clear diffraction peaks at room temperature, indicating the formation of highly ordered layer structures. However, the layer structures of the linear copolymers gradually disordered when heated. Conversely, the regularity of cyclic copolymer LB multilayers did not change with heating up to 50 °C. Higher‐order reflections (d₀₀₂, d₀₀₃) in the XRD patterns were also unchanged, indicative of a highly ordered structure. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 486–498     

Separation and purification of 99mTc from 99Mo produced by electron linear accelerator

The medical radionuclide ⁹⁹Mo was produced by the ¹⁰⁰Mo(γ,n) reaction using bremsstrahlung photons generated by an electron linear accelerator. The amount of ⁹⁹Mo produced was compared to that predicted by calculation using the particles and heavy ion transport code system. From the ⁹⁹Mo produced, highly pure ^99mTc was separated using the so-called technetium master milker, and the chemical yield of ^99mTc was 83–99 %. The installation of a new complex using this method and the electron linear accelerator with the preferable specification was suggested, and a possibility to supply the demand of ^99mTc was discussed and shown.

     

An Inverse Problem in Periodic Diffractive Optics: Reconstruction of Lipschitz Grating Profiles

We consider the problem of recovering a two-dimensional periodic structure from scattered waves measured above the structure. Following an approach by Kirsch and Kress, this inverse problem is reformulated as a nonlinear optimization problem. We develop a theoretical basis for the reconstruction method in the case of an arbitrary Lipschitz grating profile. The convergence analysis is based on new perturbation and stability results for the forward problem.     

Realistic Effective YN Interactions in Hypernuclear Models

The features of the new interaction model ESC08 in Λ N, Σ N, Λ Λ and Ξ N channels are demonstrated on the basis of the G-matrix theory.     

Diastereoselective Synthesis of a Hydroazulene Derivative by Tandem Michael-Wittig Reactions

The reaction of a cyclic phosphonium ylide [ 1 ] with enoate 2 gives a hydroazulene derivative with stereoselectivity.     

Analysis of a meshless solver for high Reynolds number flow

In this paper, the extension of an upwind least‐square based meshless solver to high Reynolds number flow is explored, and the properties of the meshless solver are analyzed both theoretically and numerically. Existing works have verified the meshless solver mostly with inviscid flows and low Reynolds number flows, and in this work, we are interested in the behavior of the meshless solver for high Reynolds number flow, especially in the near‐wall region. With both theoretical and numerical analysis, the effects of two parameters on the meshless solver are identified. The first one is the misalignment effect caused by the significantly skewed supporting points, and it is found that the meshless solver still yields accurate prediction. It is a very interesting property and is opposite to the median‐dual control volume based vertex‐centered finite volume method, which is known to give degraded result with stretched triangular/tetrahedral cells in the near‐wall region. The second parameter is the curvature, and according to theoretical analysis, it is found in the region with both large aspect ratio and curvature, and the streamwise residual is less affected; however, the wall‐normal counterpart suffers from accuracy degradation. In this paper, an improved method that uses a meshless solver for the streamwise residual and finite difference for wall‐normal residual is developed. This method is proved to be less sensitive to the curvature and provides improved accuracy. This work presents an understanding of the meshless solver for high Reynolds number flow computation, and the analysis in this paper is verified with a series of numerical experiments. Copyright © 2012 John Wiley & Sons, Ltd.